Hoditeria handientzako egokitzen da, bi pieza motako konponketa-euskarria hodia konpondu daiteke instalazio espazio handirik gabe.
Egokia da hodiak od φ180-φ2032mm
The advantage of GRIP-D repair clamps is that is can befitted to existing pipes in situation, without any need to remove and replacing pipes, GRIP-R pipe repair clamp can repair the pipes that are ageing and corrosive and pipe wall has holes or cracks . When installing it, it only needs pipe clamp to wrap the leakage part and tighten the bolt. Then the installation is finished ideally and reliably.
Grip-D Parametro teknikoak
| Laneko presioa | Zabal | Hodien muturren arteko hutsunea ezartzea | Momentu tasa | Torloju | ||||||||
| Ot | Min-max |  |  | Φ | B | C | ||||||
| (Mm) | (Mm) | (taberna) | (taberna) | (mm) | (mm) | (mm) | (mm) | (mm) | (mm) | (Nm) | M | |
| 180 | 7.087 | 16 | 30 | 204 | 142 | 250 | 75 | 40 | 60 | M12 × 2 | ||
| Hari | 7.874 | 198-202 | 16 | 30 | 224 | 142 | 250 | 75 | 40 | 60 | ||
| 219.1 | 8.626 | 216-222 | 16 | 30 | 2511.1 | 142 | 250 | 75 | 40 | 60 | ||
| 250 | 9.843 | 247-253 | 16 | 25 | 282 | 142 | 250 | 75 | 40 | 80 | ||
| 267 | 264-270 | 16 | 25 | 299 | 142 | 250 | 75 | 40 | 80 | |||
| 273 | 10.748 | 16 | 25 | 305 | 142 | 250 | 75 | 40 | 80 | |||
| 304 | 11.969 | 301-307 | 10 | 20 | 336 | 142 | 250 | 75 | 40 | 80 | ||
| 12.752 | 320-327 | 10 | 20 | 355,9 | 142 | 250 | 75 | 40 | 80 | |||
| 355,6 | 352-359 | 8,5 | 16 | 387.6 | 142 | 250 | 75 | 40 | 80 | |||
| 377 | 375-379 | 8,5 | 16 | 409 | 142 | 250 | 75 | 40 | 80 | |||
| 16.000 | 402-411 | 7,9 | 16 | 438 | 142 | 250 | 75 | 40 | 80 | |||
| 18.000 | 6 :5 | 12 | 489 | 142 | 250 | 75 | 40 | 80 | ||||
| 508 | 6 | 10 | 540 | 142 | 250 | 75 | 40 | 120 | M16 × 2 | |||
| 558,8 | 22.000 | 554-564 | 5.5 | 10 | 590,8 | 142 | 250 | 75 | 40 | 160 | ||
| 609,6 | 605-615 | 5 | 10 | 641.6 | 142 | 250 | 75 | 40 | 160 | |||
| 28.000 | 4 | 5 | 142 | 250 | 75 | 40 | 160 | |||||
| 762 | 30.000 | 758-766 | 4 | 5 | 794 | 142 | 250 | 75 | 40 | 160 | ||
| 812,8 | 809-817 | 4 | 5 | 844,8 | 142 | 250 | 75 | 40 | 160 | |||
| 4 | 5 | 946,4 | 142 | 250 | 75 | 40 | 160 | |||||
| 1016 | 1012-1020 | 4 | 5 | 1048 | 142 | 250 | 75 | 40 | Hari | |||
| 1117.6 | 44.000 | 1113-1122 | 3.5 | 5 | 142 | 250 | 75 | 40 | Hari | |||
| 3.5 | 5 | 1251.2 | 142 | 250 | 75 | 40 | Hari | |||||
| 1320,8 | 52.000 | 1316-1325 | 3 | 5 | 1352,8 | 142 | 250 | 75 | 40 | 240 | ||
| 56.000 | 1418-1427 | 3 | 5 | 1454.4 | 142 | 250 | 75 | 40 | 240 | |||
| 1524 | 60.000 | 2.5 | 5 | 1556 | 142 | 250 | 75 | 40 | 240 | |||
| 1625,6 | 64.000 | 1621-1631 | 2.5 | 5 | 142 | 250 | 75 | 40 | 240 | |||
| 1727.2 | 68.000 | 2.5 | 5 | 142 | 250 | 75 | 40 | 240 | ||||
| 1828,8 | 72.000 | 1824-1834 | 2 | 5 | 142 | 250 | 75 | 40 | 240 | |||
| 1930.4 | 76.000 | 1925-1935 | 2 | 5 | 142 | 250 | 75 | 40 | 240 | |||
| 2032 | 80.000 | 2027-2037 | 2 | 5 | 2064 | 142 | 250 | 75 | 40 | 240 | ||
| Materiala / osagaiak | V1 | V2 | V3 | V4 | V5 | V6 |
| Nesaintza | AISI 304 | AISI 316L | AISI 316L | AISI 316TI | AISI 304 | |
| Torloju | AISI 304 | AISI 316L | AISI 304 | AISI 304 | AISI 4135 | |
| AISI 304 | AISI 316L | AISI 304 | AISI 304 | AISI 4135 | ||
| Aingura eraztuna | ||||||
| Strip Txertatu (aukerakoa) |
Kautxuzko juntaduraren materiala
| Komunikabideak | Tenperatura-tartea | |
| Orpdm | ||
| Urtzer | ||
| Mvq | Tenperatura handiko likidoa, oxigenoa, ozonoa, ura eta abar | |
| FPM / FKM |